Plastic Quick Coupler Water Valve, 3/4 in and 1 in, Bodies, Stems and Kits

These are the fittings that turn a garden tap into a fixed watering point: a valve body sunk into the ground, a stem that pushes in and seals, and a range of elbows, plates and kits to take the hose away in the right direction.

Quick Coupler Water Valve: Overview

The valve is a two-part fitting. The body is buried or fixed at the point where water is wanted, and the stem is pushed in to release the flow. A spring-loaded seal closes when the stem is pulled out, so a hose can be moved from one point to another without going back to the tap.

The parts are moulded in engineering plastic and offered in 3/4 in and 1 in sizes, both of which match standard hose fittings. Bodies, stems, blanking plates, fixed elbows and swivel elbows are all sold separately, so a system can be built up point by point or a single part replaced.

Complete kits are also offered: two-piece sets of body and stem, three-piece sets, and kits that include the coupler and the elbow so the hose leaves the valve in the direction wanted. The swivel version lets the coupler turn without kinking the hose, which is the version to fit where the hose is pulled from different angles.

The parts are used on lawns, beds, borders, greenhouses and allotments, and are bought by garden centres, irrigation suppliers and hardware retailers.

Key Features at a Glance

• 3/4 in and 1 in – matches standard hose fittings.
• Push-in stem – water on demand at a fixed point.
• Spring seal – closes when the stem is pulled out.
• Parts sold separately – bodies, stems, plates, elbows.
• Swivel and fixed elbows – take the hose the right way.
• Complete kits – two and three-piece sets.

Available Models and Prices

All options are in stock. Prices are per unit in USD; carton prices on request.

Specifications

Packaging Information

Shackles ship individually bagged or boxed; trade cartons are available on request.

Where It Is Used

Lawn and border watering, greenhouse and allotment irrigation, garden centres and irrigation suppliers, landscape and grounds maintenance, and household garden ranges where a fixed watering point is wanted.

Choosing Quick Coupler Valve Parts

1. Choose the size to match the hose and the tap: 3/4 in for a standard garden hose and domestic supply, 1 in where a longer run, a larger area or a second outlet is being fed.
2. Choose the swivel elbow where the hose is pulled from different directions, since it lets the coupler turn rather than kink at the valve.
3. Buy the parts separately where a system is being extended point by point, and the kits where a single watering point is being installed from nothing.
4. Fit the blanking plate on any point that will not be used straight away. An open body fills with soil and grit, and the seal will not close on it afterwards.

Care and Maintenance

Lift the stem out and flush the body at the end of the season, and store the stems indoors: the spring and the seal are what fail, and both last longer out of the frost.

Do not leave a hose connected over winter. Water trapped in the body will freeze and split the moulding.

OEM and Bulk Supply

T

h

e

f

a

c

t

o

r

y

o

f

f

e

r

s

o

w

n

–

b

r

a

n

d

m

o

u

l

d

i

n

g

,

p

r

i

n

t

e

d

p

a

c

k

a

g

i

n

g

a

n

d

c

u

s

t

o

m

c

o

l

o

u

r

s

,

a

n

d

a

c

c

e

p

t

s

O

E

M

a

n

d

O

D

M

o

r

d

e

r

s

o

n

i

r

r

i

g

a

t

i

o

n

f

i

t

t

i

n

g

s

.

Frequently Asked Questions

Which options are available?

This listing covers 26 options: 3/4 in, three-piece set; 1 in, three-piece set; 3/4 in, valve body; 1 in, valve body; 3/4 in, valve stem; 1 in, valve stem; 3/4 in, two-piece set; 1 in, two-piece set; 3/4 in, blanking plate; 1 in, blanking plate; 3/4 in, elbow; 1 in, elbow; 3/4 in, swivel elbow; 1 in, swivel elbow; 3/4 in, nipple; 3/4 in, kit with coupler; 3/4 in, kit; 3/4 in, swivel kit with coupler; 1 in, fixed kit with 1/2 in coupler; 1 in, swivel kit; 1 in, swivel kit with coupler; 1 in, kit with brass fitting; 1/2 in coupler; 3/4 in coupler; 3/4 in, three-piece set, all green; 1 in, three-piece set, all green. All are in stock and priced individually.

How heavy is it and how is it packed?

The unit weighs about About 20 g to 400 g by part. Shackles ship individually bagged or boxed; trade cartons are available on request.

What is it made of?

Key material: Engineering plastic. Other specifications are listed in the Specifications table above.

What is it used for?

Lawn and border watering, greenhouse and allotment irrigation, garden centres and irrigation suppliers, landscape and grounds maintenance, and household garden ranges where a fixed watering point is wanted.

Can I buy in bulk or with my own branding?

Yes. Own-brand packaging, printed labels and mixed cartons are available on request.

Summary

These are the fittings that turn a garden tap into a fixed watering point: a valve body sunk into the ground, a stem that pushes in and seals, and a range of elbows, plates and kits to take the hose away in the right direction. Offered in 26 configurations, each priced separately.

Typical use:

Lawn and border watering, greenhouse and allotment irrigation, garden centres and irrigation suppliers, landscape and grounds maintenance, and household garden ranges where a fixed watering point is wanted.