Canvas Tool Bag, 12 to 20 in, Shoulder Strap, Optional 100-Piece Box

A tool bag has one job: stay open when you reach into it, and stay shut when you carry it. This one is built from heavy-duty canvas over a reinforced base, with a zip top, a shoulder strap and a main compartment wide enough to take a hammer, a set of spanners and a tester without emptying everything to find one item. Seven models run from 12 to 20 in, and most are supplied with a 100-piece parts box for screws, bits and terminals.

Canvas Tool Bag: Overview

This is the bag an electrician, maintenance fitter or installer carries every day, rather than a moulded case that only fits one tool. The main compartment is open and deep, so long items stand up instead of lying across everything else, and there is room to put a parts box, a roll of tape and a tester where you can see them without unpacking.

Seven models cover the useful range. The 12, 14 and 18 in bags use the standard reinforced base; the 16 and 20 in bags use a waterproof moulded base for work where the bag gets put down on wet ground or a dirty floor. A folding steel-tube version is available in 16 in for heavier loads, and there is a plain 14 in bag if you do not need the parts box.

The canvas is the reason these bags last. It does not crack in cold weather the way a hard shell does, and a stitched seam can be repaired. Six of the seven models arrive with a 100-piece parts box that sits in the bag and keeps small parts sorted. Typical users: electricians, HVAC and maintenance engineers, installers, and retailers who want a bag that a customer can carry out of the shop with a full tool kit inside. Supplied by Dongguan Qianhong Electronic Technology.

Handle and strap are both stitched through the bag rather than riveted to a single layer, which is the usual failure point on cheap tool bags: the handle holds when the bag is loaded to the weight it is designed for.

Key Features at a Glance

• Heavy-duty canvas – stitched rather than moulded, so it does not crack in cold weather and can be repaired.
• Seven models, 12 to 20 in – from a compact carry bag to a 20 in bag for a full kit.
• Waterproof moulded base – on the 16 in and 20 in models, for wet ground and dirty floors.
• 100-piece parts box – supplied with six of the seven models, keeping screws and terminals sorted.
• Zip top and shoulder strap – the bag closes in transit and carries hands-free when you need both hands.
• Folding steel-tube option – a 16 in frame version for heavier loads and regular site work.

Material, Base and Carry Options

Canvas body and reinforced base

The body is heavy-duty canvas with a reinforced base panel, which is the part that wears first when a bag is put down on concrete day after day. On the 16 in and 20 in models the base is a waterproof moulded shell instead, so the bag can sit on wet ground without the contents soaking through.

Canvas has an advantage over a hard case that matters on site: it gives. A bag that gives can be over-filled, squeezed behind a seat and dropped without splitting, and a torn seam can be sewn up. The trade is that it does not protect delicate instruments from impact the way a moulded case does.

Zip, strap and the folding frame version

The top closes with a zip so tools do not spill in the back of a van, and the shoulder strap leaves both hands free when you are carrying the bag up a ladder or along a corridor. The 100-piece parts box sits inside the main compartment and lifts out when you need the whole bag for hand tools.

The 16 in folding steel-tube model adds an internal frame that holds the bag open on its own and carries heavier loads than a soft bag of the same size. Choose it if the bag lives on a site and gets loaded and unloaded several times a day.

Available Models and Prices

All seven models are in stock. Prices are per bag in USD; the 100-piece parts box is included with six of the seven models.

Specifications

Packaging Information

Each bag ships folded with the parts box packed inside. Bulk orders can be supplied as bag-only cartons if the parts boxes are not required.

Where These Bags Are Used

Carrying hand tools on electrical, HVAC, plumbing and maintenance work. Site installation work where the bag is loaded and unloaded several times a day. Keeping a van or workshop kit together so nothing is left behind on a job. Retail counter sales where the customer buys the bag and the tool kit at the same time, and warehouse picking where a bag is used to carry a set of parts to the bench.

How to Choose

1. Match the size to the longest tool you carry. A 14 in bag takes a 300 mm spanner; a 20 in bag takes a full kit including a hacksaw and a long level.
2. Choose the 16 in or 20 in waterproof-base model if the bag will be put down on wet or dirty ground.
3. Choose the 16 in folding steel-tube version if the bag is loaded heavily and used on site every day.
4. Take the plain 14 in bag if you already have a parts box and want to save the cost of a second one.

Care and Maintenance

Empty the bag and shake it out at the end of a job. Grit that collects in the base abrades the stitching from the inside, which is what actually wears a canvas bag out.

Do not store the bag loaded for long periods if it is damp. Canvas dries quickly when it is empty and slowly when it is packed, and trapped moisture is what makes a bag smell and rot.

Check the strap stitching and the zip pull periodically, particularly on a bag that is carried by the shoulder strap rather than the handle.

Wipe a waterproof moulded base clean rather than scraping it; the shell resists water but not a chisel.

OEM and Bulk Supply

This range is supplied by Dongguan Qianhong Electronic Technology Co., Ltd., which has traded on 1688 for five years. Bag size, base type, strap, logo and the contents of the parts box can all be specified for bulk orders.

For wholesale and private-label enquiries, tell us the size, whether you want the waterproof base or the folding frame, whether the parts box is required, and the quantity. Mixed-size cartons are quoted on request.

Frequently Asked Questions

Which size should I choose for a full tool kit?

For a kit with a hammer, spanners, pliers, a tester and a tape, 16 in is the practical minimum and 18 to 20 in is comfortable. The 12 and 14 in bags suit a small carry set.

Is the 100-piece parts box included?

Yes on six of the seven models. The plain 14 in bag is supplied as the bag only, which is the cheaper option if you already own a parts box.

What does the waterproof base mean in practice?

The 16 in and 20 in models use a moulded base shell instead of a reinforced canvas panel, so the bag can stand on wet ground or a dirty floor without water soaking up into the fabric.

How heavy is the bag?

Around 1 kg empty for the standard models. The folding steel-tube version is heavier because of the internal frame; ask us if you need the exact figure for a specific size.

Summary

A heavy-duty canvas tool bag with a zip top, a shoulder strap and a reinforced or waterproof base, in seven models from 12 to 20 in. Six models include a 100-piece parts box, and the 16 in folding steel-tube version takes heavier loads for daily site work.

Prices start at $8.99 per bag. Sizes, base type, strap and parts-box contents can be specified for bulk and private-label orders.