DMD Fan-shaped Knife Sharpener, Outdoor Tool, Diamond, 1202 / 400 / 600 / 1705, 6 Options

Knife Sharpeners supplied for bench and shop production work where the machine runs all day on the same job. The range covers 6 options, built in Diamond, and each option is priced separately so the cost can be matched to the job rather than averaged across the range. Made by Mia Hardware.

Knife Sharpeners: Overview

This listing covers 6 options of knife sharpeners, and every option is held in stock so a single unit and a repeat order ship from the same batch.

The working parts are made in Diamond, which is what decides how the item behaves in service rather than how it looks on the shelf.

Buying direct from the maker keeps the price at trade level and keeps the door open for bulk cartons and OEM branding on the same item.

Key Features at a Glance

• 6 options – sizes and grades to suit different duties, all priced separately.
• Diamond – chosen for the working parts, not just the finish.
• Sizes 1202 / 400 / 600 / 1705 – the common sizes are covered without a special order.
• Trade supply – single units and bulk cartons from the same production batch.
• OEM and ODM – custom logo and custom packaging available on request.
• Export packing – boxed for shipment and cartoned for pallet or container loads.

Using Knife Sharpeners

Matching the item to the job

Start from the bench and shop production work where the machine runs all day on the same job you actually do, then choose the size and the grade from the table above. Buying the heaviest option for light work costs money on every order, and buying the lightest option for heavy work costs more in replacement.

Where the range offers several sizes, keep one of each common size in stock rather than several of the one you use most. The second size is what saves a second delivery.

Working practice

Set the item up square and tight before work starts. Most of the damage reported on knife sharpeners comes from starting a job with something loose or misaligned rather than from the load itself.

Work at the speed and the feed the material allows. Pushing harder to save a minute is what shortens the life of the item and spoils the finish at the same time.

Buying and Care

Buying in quantity

Prices fall with quantity, and mixing sizes in one carton is normally possible. Tell us the sizes and the split you want and we will quote the carton and the pallet.

For repeat business a sample order first is the cheapest way to confirm the grade, the finish and the packing before a container is booked.

Storage and upkeep

Clear the swarf and blow the dust off the table, the ways and the motor vents at the end of every shift. Swarf left on the table is what throws a machine out of alignment.

Let the machine warm up before a production run and keep it inside the duty cycle on the rating plate. A machine worked cold at full load wears its bearings first.

Available Models and Prices

All options are in stock unless marked otherwise. Prices are per unit in USD; carton and pallet prices on request.

Specifications

Packaging Information

Units ship boxed and are cartoned for pallet or container loads. Mixed sizes in one carton are available on request.

Where It Is Used

Metalworking and woodworking shops, fabrication and assembly lines, maintenance workshops, and production runs where the same operation is repeated all day.

Choosing Knife Sharpeners

1. Match the working capacity to the largest job you take on, then pick the voltage and plug type for your market. A machine sized for the biggest job works out cheaper than two sized for the average one.
2. Check the size and the quantity against the job before ordering, and ask for a sample where the grade is not obvious from the photograph.
3. Allow for spares on the sizes you use daily. A second unit in the van or the store is cheaper than a lost day.

Care and Maintenance

Clear the swarf and blow the dust off the table, the ways and the motor vents at the end of every shift. Swarf left on the table is what throws a machine out of alignment.

Let the machine warm up before a production run and keep it inside the duty cycle on the rating plate. A machine worked cold at full load wears its bearings first.

OEM and Bulk Supply

Custom logo, printed packaging and own-brand cartons are available on this item, and the supplier accepts OEM and ODM work.

Tell us the artwork, the carton quantity and the market the goods are going to, and we will quote the tooling and the lead time before the order is placed.

Frequently Asked Questions

Which options are available?

This listing covers 6 options: 1202- Black *400/ 600; 1202- Orange *400/ 600; 1705 Black *400/ 600; 1705 Orange *400/ 600; 1202- Black *360/ 600; 1202- Orange 360#/ 600. All are in stock and priced individually.

How heavy is it and how is it packed?

The unit weighs about 0.11 kg. Units ship boxed and are cartoned for pallet or container loads. Mixed sizes in one carton are available on request.

What is it made of?

Key material: Diamond. Other specifications are listed in the Specifications table above.

What is it used for?

Metalworking and woodworking shops, fabrication and assembly lines, maintenance workshops, and production runs where the same operation is repeated all day.

Can I buy in bulk or with my own branding?

Yes. Bulk cartons, custom logo and custom packaging are available on request, and the supplier accepts OEM and ODM work.

Summary

Knife Sharpeners supplied for bench and shop production work where the machine runs all day on the same job. Offered in 6 configurations, each priced separately.

Typical use: Metalworking and woodworking shops, fabrication and assembly lines, maintenance workshops, and production runs where the same operation is repeated all day.