Sealed Tool Case, 38 x 19 x 24 cm, Moisture-Resistant, Carry Handle

The gasket is what separates this case from a plain toolbox. A seal strip in the lid keeps dust, grit and water spray out of the contents, which is the difference between a case that can go on a boat, a quad or a fishing bank and one that cannot. It measures 38 x 19 x 24 cm, weighs about 1 kg, and closes on a heavy-duty catch. Made by Chenxuan.

Sealed Tool Case: Overview

A seal strip is fitted into the lid, so the case closes onto a gasket rather than metal-to-plastic. That keeps out the dust and spray that ruin tools and electronics stored outdoors.

The case measures 38 x 19 x 24 cm internally, which takes a full hand tool kit, a cordless drill with batteries, or a fishing and outdoor kit. It weighs about 1 kg.

The catch is the heavy-duty pattern and the handle is moulded into the shell, so the case can be carried loaded without the lid flexing open.

Key Features at a Glance

• Seal strip in the lid – keeps dust, grit and spray away from the contents.
• 38 x 19 x 24 cm – takes a hand tool kit or a cordless drill with batteries.
• Heavy-duty catch – closes firmly and does not spring open.
• Moulded carry handle – formed into the shell, no separate fitting.
• About 1 kg – light for its volume.
• Outdoor and trade use – boats, quads, fishing, site and workshop storage.

The Sealed Lid

What the seal strip does

The gasket runs around the rim of the lid and is compressed when the catch closes, so the joint between lid and body is closed against dust and light spray.

That matters most for electronics, meters, cameras and tools that rust: grit and moisture cause far more damage inside a case than a knock on the outside.

What it is not

A gasketed case is splash and dust resistant, not a waterproof or submersible container. It should not be left standing in water or used to carry liquids.

If the case is going to be immersed or stored in a wet bilge, a purpose-made waterproof case with a clamped lid is needed instead.

Size and Use

What fits inside

The 38 x 19 x 24 cm cavity takes a full hand tool kit, or a cordless drill with two batteries, a charger and a bit set, or a boxed fastener assortment.

It is also the size used for electrical test gear, survey kit and photographic equipment, where the sealed lid is the reason for choosing it.

Carrying and storage

The moulded handle sits over the centre of the case, so it hangs level when loaded. The catch is on the front, which allows the case to be opened without putting it down flat.

The case stacks with others of the same size and can be labelled on the lid for kit identification.

Specifications

Packaging Information

Cases ship individually bagged or boxed; carton quantities are available on request.

Where It Is Used

Boat, quad and vehicle storage, fishing and outdoor kit, electrical test gear and meters, photographic equipment, site tool storage and workshop parts storage.

Choosing a Tool Case

1. Size the case to the largest tool in the kit and allow a little room, rather than buying to the number of tools.
2. Choose a sealed case where the kit meets dust, grit or water; a plain case is enough for a van or a workshop shelf.
3. Use colour coding where more than one person or team uses the same tools – a colour per kit keeps the contents together.
4. Check the weight of the loaded kit before choosing a handle; a moulded handle is fine for hand tools, but a heavy kit needs a case with a wider grip.

Care and Maintenance

Wipe the case out after use and leave the lid open to dry before closing it; trapped damp is what rusts the tools inside, not the case itself.

Do not stand on a plastic case or use it as a step, and keep it out of direct sun for long periods, which embrittles the moulding.

OEM and Bulk Supply

The supplier offers own-brand labels, custom colours and printed packaging, with mixed cartons for trade counters and kit builders.

Frequently Asked Questions

Is this a single item or a set?

It is supplied as described above – Sealed plastic tool case. One unit per order.

How heavy is it and how is it packed?

The unit weighs about About 1 kg. Cases ship individually bagged or boxed; carton quantities are available on request.

What is it made of?

Key material: Moulded plastic (PP). Other specifications are listed in the Specifications table above.

What is it used for?

Boat, quad and vehicle storage, fishing and outdoor kit, electrical test gear and meters, photographic equipment, site tool storage and workshop parts storage.

Can I buy in bulk or with my own branding?

Yes. Own-brand labels, custom colours and printed packaging are available on request.

Summary

The gasket is what separates this case from a plain toolbox.

Typical use: Boat, quad and vehicle storage, fishing and outdoor kit, electrical test gear and meters, photographic equipment, site tool storage and workshop parts storage.